Tubes and bars – Page 2

EBNER FURNACES & ELETRICAL STEEL

EBNER will be putting a special focus on the subject of heat treatment facilities for electrical steel strips. The reason for this is the increasing demand with extraordinarily positive growth forecasts for electrical steel!

Recent studies have shown that electrical steel is going to play an increasingly crucial role.

On the one hand because it is used in the production of motors for hybrid and electric vehicles, which will replace a large proportion of internal combustion vehicles in the medium to long term. This will increase the demand for non grain-oriented (NGO) electrical steel.

On the other hand because it is used in the production of transformers, essential components of all power distribution networks, which are more and more complex and intelligent; this results in a growing need for grain-oriented (GO) electrical steel.

EBNER offers a full range of heat treatment equipment for GO and NGO electrical steels. For further information on this subject, please check the website.

SEQUEM IS HERE!

SEQUEM is at your disposal for any additional information regarding EBNER furnaces. Please feel free to contact our team by e-mail or phone at + 33 3 28 80 55 60.

SEQUEM now represents GEGA

Since 1 April 2019, SEQUEM has been the new representative of GEGA, a world-known German company and long-standing player in the field of torch cutting.

GEGA is part of the Austrian-based ALPINE METAL TECH (AMT) group, owning also the NUMTEC and MAGNEMAG brands which SEQUEM has been representing for over 10 years. Consequently, GEGA complements the range of solutions SEQUEM offers the steel industry:

GEGA
Torch cutting solutions: strand cutting, sizing of slabs and billets, scrap cutting, scarfing

NUMTEC
Deburring, hot and cold marking of semi-finished steel products, accessories for continuous casting

MAGNEMAG
Hot and cold paint marking, punch marking, die marking

Download more details on these 3 brands here.

For any additional information, please feel free to call (+33 3 28 80 55 60) or e-mail us (sequem@sequem.fr).

BÜLTMANN is pleased to invite you in its workshop in Neuenrade (Germany) where you can see a new tube production line, type RPL 050!
This equipment is available from April 15 to May 31, 2019.

Starting material

Tube diameter Ø 15 – 55 mm

Wall thickness 1 – 6,5 mm

Tube length 4 – 12 m

Bundle diameter max. 800 mm

Finished material

Tube diameter Ø 12 – 50 mm

Wall thickness 0,8 – 6 mm

Tube length 5 – 15 m

Yield strength max. 800 MPa

Technical data

Material E355, 26MnB5, 34MnB5

Yield strength max. 500 MPa

The tube production mainly comprises the following:

Pointing equipment, type HAM 150 / PH 050, with automatic separation
Drawing equipment, type RZ 0800/3-15, with geometry and surface control, as well as with discharge cradle
Straightening equipment, type RRM 10/050, with automatic separation

Do you want to see this machine? We would be glad to help you plan your visit! Please contact us by filling our contact form or send an email to al@sequem.fr.

SEQUEM Team

70 YEARS OF EBNER IN MOTION

If change is the only constant in our lives,

then movement is a constant of progress.

Under the motto “70 years of EBNER in motion”, an expert symposium including high-caliber international speakers and presentations will take place from September 11 – 13, 2018 at EBNER’s Leonding works.

In this event a mutual exchange of ideas and visions will take place and the future and the past will meet.

Our theme will be the future challenges that will be faced by manufacturers in the steel, aluminum and copper base metal industries. The main focus, however, will be upon “Future trends in mobility”.

Virtually every one of our facilities supports the mobility sector in one form or another. For example, EBNER facilities throughout the globe fulfill more than 80 % of the demand for aluminum automobile body sheet. With facilities for hot forming, EBNER is also active in the production of high-strength steels for the automotive sector. Over the course of the event, future developments in the mobility sector will be illuminated throughout the entire value-added chain, from end users and OEMs to EBNER and its suppliers.

We would recommend that you attend the entire two-and-a-half days of the symposium, as the presentations build upon one another. Alongside the expert symposium, there will of course be a program of activities for those accompanying you.

We also recommend that you register as soon as possible, as space is limited. Come celebrate 70 years of success with EBNER, and let us look to the future together! You can complete the registration form by following this link.

You can also download a preview of the program of the symposium here.

We would be delighted to inclued you among our guets and you be happy to answer any question regarding our program or the planning of your visit. Do not hesitate to contact Mrs. Leturgie al@sequem.fr or Mrs. Wagner tao@ebner.cc for any further information.

Happy Holiday Season!

The 20th IFM (International Forgemasters Meeting) will be held in Graz, Austria, from 11th to 14th September.

The IFM is a key biennial event that BRAUN has decided to take part in, with a booth and a dedicated conference.

BRAUN, a technology leader in steel cutting and grinding machines since 1848, is widely known as an innovative and high-end company; BRAUN is the preferred partner of the steel and tube industries, throughout the world!

BRAUN looks forward to welcoming you on its booth, so… join in! To do so, simply reach out to our team using the SEQUEM contact form or write to al@sequem.fr . More information on this event and on BRAUN available by clicking here.

See you soon!

Team SEQUEM.

Grinding and abrasive cutting: Open House Weeks at BRAUN’s workshops

The workshops of our austrian supplier specialized in grinding and abrasive cutting contain a lot of interesting and innovative installations that are beeing mounted or ready for expedition!

Judge for yourself!

4 billet grinding machines (type HP 6)

2 spiral grinding machine for round electrods (type HP 6)

1 edge deburring grinding machine for slabs, booms and billets. NEW DEVELOPMENT ! (ES 4)

1 combined abrasive cut-off or cold circular sawing machine… the advantages of 2 technologies finally brought together! NEW DEVELOPMENT ! (TSKS 12/10L)

The firm BRAUN wants to take advantage of this incredible showcase to invite you to its “GRINDING WEEKS 2017”, taking place in weeks 23, 24, 25 & 26 and entirely focused on the state-of-the-art of grinding and abrasive cutting technologies!

SEQUEM would be delighted to help you organize your visit to Vöcklabruck (Austria). Feel free to contact us !

Come and visit BÜLTMANN’s new finishing line for hot rolled bars

We are pleased to invite you to view BÜLTMANN’s new finishing line for hot rolled bars up to a Ø of 100 mm! This line will be available for visit in Neuenrad (Germany) until March 13, 2017.

Technical data:

Working range                                                                       18 – 100 mm
Bar length                                                                                     2 – 8,5 m
Tensile strength                                                                350 – 1700 MPa
Straightening speed                                                            10 – 80 m/min.
Straightening accuracy after finish straightening                       < 1mm/m

The special features and highlights of this equipment are:

High running time due to robust design and an almost automatic dimensional change
Automatic, PC-supported adjustment to material parameters
10 roll principle with three active bending triangles for good and uniform straightness
High reproducibility of setting values with absolute encoder and hydraulic clamping of straightening rolls
Short change-over times
Automatic entry guiding, without changing over to the different diameters

We would love to help you organise your visit! Don’t hesitate to contact us via the e-mail adress al@sequem.fr or by phone +33 328 80 55 64.

SEQUEM

BÜLTMANN – Invitation to view the new peeling machine for bar!

We are pleased to invite you to view BÜLTMANN’s new peeling machine for a max. bar diameter of 80 mm from the 1st February to the 8th March 2017!

Technical data:

Material round bars out of stainless steel

Tensile strength R_m up to 2000 MPa

Finished bar diameter 20 – 80 mm

Bar length 3,5 – 9 m

Installed capacity hollow shaft approx. 178 kW

Feed speed 0,2 – 60 m/min.

Attainable diameter tolerance IT 9

Surface quality Ra ≤ 2 µm

The special features and highlights of this machine are:

Large charging rack for two bar bundles
Chamfering and milling equipment
High performance and long tool life
High-pressure cooling
Closes tolerances due to a cutting head with 6 tools
Testing equipment with sorting according to defect type
Cradle system for charging and discharging of bars

We would love to help you organise your visit! Don’t hesitate to contact us via the e-mail adress

SEQUEM

Category: Tubes and bars

Category Archives: Tubes and bars